Accessories

CNG Components

MAP SENSOR

This is the first ever type sensor in the market that is designed to carry out gas temperature measurements directly into gas flow so as to eliminate all errors. The embedded pressure sensor eliminates the necessity of soldering. The small dimensions and 5-pin connector made in IP54 standard make the sensor all the more pleasant for the installer.

The map sensor is the product of many long-term tests conducted in laboratory, under normal operating conditions, and using high quality components to ensure that the product is both accurate and reliable.

Technical specifications:

  • Integrated MAP, gas pressure and temperature sensor
  • Pressure range: 0/4 bar, absolute pressure
  • Temperature measurement directly in the stream of flowing gas
  • Temperature sensor resistance: 10k Ohm
  • Gas temperature rang: -40/120 degree C.
  • Pass-through vacuum pipe port
  • Electric connector: 5 pins
  • Gas inlet port diameter: 11mm
  • Vacuum pipe port diameter
  • Dimensions width: 43 (80 with pipe port), height 50mm, thickness: 27mm

INDICATOR SWITCH (MSS-04)

This switch is programmed which is compatible with only MIJO 204 version of our ECM. These offer fast and safe switching options from Gas to petrol and vice versa. This makes the system more reliable when there is limited availability of one kind of fuel. There is a buzzer with the switch which beeps when the car switch from Gas to Petrol and Vice versa

Cng kits Delhi

MIJO GAS INDICATOR SWITCH (MMS-04)

The devices are used in bi-fuel vehicle systems which run on switching between liquid and gaseous fuel. They show the gas capacity and send the work order to the fuel supply device simultaneously. They are helpful for starting the engine with petrol first and switching to gas mode automatically when the speed of the vehicle is beyond a specified limit. They help in carrying out an emergency start with gas when petrol is completely exhausted.

Cng kits Delhi

MIJO CNG LAMBDA CONTROL SYSTEM (LCS-01)

Mijo CNG Lambda control systems are installed in fuel injection vehicles to control the flow of natural gas to the engine automatically without any manual adjustments. The system is essential for vehicle conversion to ensure correct air-fuel ratio. It is equipped with essential devices and sensors to meet the demands of quality installations.

Cng kits Delhi

MIJO EMULATOR (ME-11)

Emulator is an electronic device which stops or cuts off the flow of petrol on cars equipped with electronic injection system and emulates the signal of injectors or other sensors. The type of injection system used for conversion helps to decide the model of emulator suitable for different cars.

Cng kits Delhi

MIJO GAS-AIR MIXERS

This mechanical device introduces the gaseous fuel to the induction air of the engine and ensures air-fuel mixing in accurate proportions. The venture, dimensions and design of the mixer is developed to suit the functioning of different vehicle-models.

Cng kits Delhi

GAS FILTER (MGF-08)

Mijo manufactures gas filters which are placed between Reducer and Injector rail to prevent the accumulation of any particulate matter in the vaporizers. These filters ensure safe and uninterrupted functioning of the vehicle.

Product Image Product Code Product Name/Descrption
CNG Components - Mijo CNG Pressure Gauge

MPG-12

MIJO CNG PRESSURE GAUGE 12V
CNG Components - Mijo CNG Pressure Gauge

MPG-05

MIJO CNG PRESSURE GAUGE 5V
Timing Advance Processor

MTA.31

TIMING ADVANCE PROCESSOR – Map Sensor Based
CNG Components - Mijo Timing Advance Processor

MTA.51

MIJO TIMING ADVANCE PROCESSOR – Crank Sensor Based
CNG Components - Mijo Timing Advance Processor

MTA.51-2

MIJO TIMING ADVANCE PROCESSOR (2 PIN) – Crank Sensor Based
CNG Components - Mijo Timing Advance Processor

MTA.51-3

MIJO TIMING ADVANCE PROCESSOR (3 PIN) – Crank Sensor Based
CNG Components - Mijo CNG High Pressure Pipe

MIJO.SS-010

MIJO STEEL PIPE
CNG Components - Mijo CNG Low Pressure Pipe

MLPPS-16

MIJO CNG LOW PRESSURE PIPE SET – for Traditional Kit
CNG Components - Mijo CNG Low Pressure Pipe

MSLPPS-16

MIJO CNG LOW PRESSURE PIPE SET – for Sequential Kit
CNG Components - Mijo CNG Low Pressure Pipe

MACC-17

FITTING ACCESSORIES – for Traditional Kit
CNG Components - Mijo CNG Low Pressure Pipe

MSACC-17

FITTING ACCESSORIES – for Sequential Kit